How to remove stains when using aluminum insulation jacketing

Nowadays aluminum insulation jacketing are used in many places. Some aluminum jacketing manufacturers who are not formal may carry some stains on aluminum insulation jacketing due to weather, traffic, etc. when they ship products. When users use aluminum insulation jacketings, How should I clean these stains?


 
    1, the relevant operators first use a lot of water to flush the surface of the plate, the surface of the dirt, dust and other clean.
 
    2. Purchasing cleansers that meet the standards in the market, dilute with some clean water, and then combine soft and clean cloths. Gently wipe the surface of the board to remove some stubborn stains from the aluminum roll jacketing.
 
    3, aluminum insulation jacketing manufacturers suggest that at this time again using a lot of water to flush the aluminum roll jacketing, you can wash away the dirt.
 
    4. Carefully inspect the aluminum coil jacketing to see if there is any place where it has not been cleaned. For those parts that have not been cleaned, they can be combined with the diluted detergent.
 
    5, then use a lot of fresh water to rinse, until all the detergent washed away.


 
    In fact, the presence of stains on the aluminum coil jacket is not necessarily caused by the shipment of aluminum insulation jacketing. It may also be due to improper storage of the user. Therefore, we must also learn the correct storage method for the aluminum insulation jacketing.