corrugated aluminum jacketing

1. The flatness of the corrugated aluminum jacketing unfolded, the flatter the better, the flatness factors that affect the corrugated aluminum jacketing are aluminum coil sleeves: aluminum coils with paper sleeves are bent and pulled without waste, and the flatness is better. The price is slightly higher; the flatness of aluminum coils with aluminum sleeves is lower than that of paper sleeves, and some waste may be generated during the initial uncoiling and finishing. The weight of the entire corrugated aluminum jacketing includes the weight of the aluminum sleeve, but the manufacturer can recycle aluminum Sleeve.



2. The gloss of corrugated aluminum jacketing, the brighter the aluminum coil, the better.
 
3. Corrugated aluminum jacketing may be scratched during transportation and use. Coated corrugated aluminum jacketing can effectively avoid these problems. The coated aluminum sheet is covered during production. The film is a very thin layer. The thickness is about 6 filaments. Some people will ask that the price of coated aluminum coil is very high. In fact, this is not the case. The price is about the same as that of uncoated aluminum coil. The film has only a very thin layer, and the weight will be counted in aluminum. In the volume.
Corrugated aluminum jacketing has many advantages. First, it reduces light pollution. After embossing, the surface of the aluminum skin is divided into a number of refraction points, which turns sunlight into scattering, which is not so glaring to the naked eye.